Mercedes-Benz India today formally inaugurated its new manufacturing plant in Chakan, Pune. The new facility was completed within 13 months from the start of construction – among the fastest green-field projects to be created. With an area of 100 acres of land and independent assembly facilities for passenger cars and commercial vehicles, the infrastructure was created to address future expansion needs, underscoring the long-term growth plans of the company in India.
Dr. Joachim Schmidt, Chairman of the Board, Mercedes-Benz India: “A strong brand, committed employees, strong after-sales service network. A growing market, increasing demand and exciting products: these are the ingredients of Mercedes-Benz’ India story. And it all happens here – at the new home of Mercedes-Benz in India.”
Quality has all along been the strength of Mercedes-Benz India, and the new plant is set to take this success story even further. It successfully passed all quality gates within the first month of shifting production, and features some of the most advanced equipment available worldwide. While the plant was designed to manufacture the current local-production portfolio of the Mercedes-Benz C-, E-, and S-Class, it is also flexible enough to accommodate additional production of other models from the Mercedes-Benz model range on the same assembly line, if required by future market demand.
Prof. Dr. Eberhard Haller, Director of the Board, Mercedes-Benz India: “As the Plant Manager of the largest Mercedes-Benz plant in Sindelfingen, Germany, I am impressed by the flexibility and the potential for expansion of this facility. It was created with a long-term perspective in mind, and I am sure that we will see many new products roll off the assembly line – both from the passenger car and the commercial vehicle segments.”
Dr. Wilfried Aulbur, Managing Director and CEO, Mercedes-Benz India, added: “Over the years we have grown – and from the 600 units back in 1999, we sold 3,600 units in 2008, with growth doubling consistently in the last three years. I am convinced that this facility marks the beginning of a new era for the company in India – and today is a red-letter day for us all”.
As a responsible corporate citizen, Mercedes-Benz India has engaged in socially focused initiatives as well. Jobs in agriculture, eco-friendly mobility and wasteland recovery – these are the three points that the Jatropha biodiesel project focuses upon. The Mobile Kids road safety program and the Automotive Mechatronics program focus upon teaching and education to create citizens of a better tomorrow. The company is also helping disadvantaged children with scholarships and aid to help them continue basic and further education. Its association with NGO Cleft is also extending surgical and medical aid and assistance to disadvantaged families in Gujarat and Maharashtra. On this occasion, Mercedes-Benz India also announced its support towards re-building classrooms and providing assistance towards better facilities for students of a school in Chakan.
Mercedes-Benz has a long history of involvement with the country. Its first association in 1954 was a collaboration with Tata Motors for the production of trucks; subsequently it also cooperated with Force Motors in 1969. It was then the first luxury carmaker to set up local production on Indian soil in 1995. A year later, the Mercedes-Benz Research and Development unit was established in Bangalore. The Daimler group’s procurement organization has also been active since 1998 and is the local partner for Indian entrepreneurs and industries who offer their products and services to the company worldwide.
hi i am 3rd year b tech student,and searching for job related to plc,scada & drives .and i want a gob as a trainees.can you help me?
Hi good afternoon, i am b.tech 3rd year student and i want to take summer traning from mercedes-benz plant in Chakan, Pune.
can you please help me?
it’s useful what they are doing there in india hopeful they will hire more people to help population over there and help grow the indian economy and improve life
I am B.E. (Mechanical), having 6 month exp. as trainee Design Engg. working on Solidedge, Auto cad, Catia-v5.R u looking for more employees for your organization. Could you just send me the details about this?
i am Raviraj sidram lingampeth completing diploma in mechanical engg, and looking for the job if you have the any post for the diploma candidate send mail please
Iam Raviraj sidram lingampeth completing diploma in mechanical engg and i am looking for the job in your firm if you have the any post for the diploma candidate please send a mail please
I am suneesh bansal and i have done post graduate diploma in foreign trade and pursuing in post graduate diploma in management with marketing specialization and i am searching a job in import-export and marketing area
if you have some vacancy in our organization then please reply to me.
I am a final year BE automobile student, i had completed my diploma and VHSE in automobile, I will completing my BE at may 2010.i want a job as a trainee after may.can you help me? please.
I have passed B.Tech. (Mechanical Engineering) with distinction from the Abhinav College of Engineering & Polytechnic, Pune-2. I am now desirous to explore an employment opportunity in your renowned organization.
I am Diploma in mechanical , having 2 years exp. as Design Engg. working on Pro-e, Auto cad, Catia-v5.R , solidedge ,u looking for more employees for your organization. Could you just send me the details about this?
Hi…i am completed my B.E. mechanical engg during the academic year 2009. am intersted in design of automobiles….. if any vacancy in your organization please inform me….. thank u….
Hi, i am recently working with ADNOC (UAE) as a Vehicle Inspector for inspection of vehicle and. I have working for Emirates Transport for 4 years as a Vehicle Inspector. Further i am looking for the good exp and career in India.
Thank you…
my self sachin auti be electronics and telecomm passed out in august 2009 looking for job,my contact no is 9869235831
My self Pramodmohan Diploma in Automobile engineering passed out in may 2009,looking for job in your organisation. My contact no 08097137525.
Hi ,
I am Diploma in mechanical engineering + adv Diploma in fire& Safety engineering and having 2.5 years of fabrication & wooden dyes company experiance & want to built an carrier in automobiles sector can you please help me out ???????????
hi myself suryakant completing BE in mech engg. is there any opening contact on no 9960757406. i would like to be part of ypur organisation
HARISH PRAKASH SHARMA 16/243-F, TANKROAD,ANAND PURI
KAROL BAGH , NEW DELHI-05
Phone Nos. 09313407888, 9868864907
Email: harish.prakash1983@gmail.com
CARREAR OBJECTIVE:
A performing career in a competitive and growth oriented environment which facilitates direct contribution in a value creation for the organization by acquiring the right combination of technical and conceptual skills.
PROFESSIONAL QUALIFICATION :
Diploma in Automobile Engineering from Pusa Polytechnic, Pusa, New Delhi
One year “Tractor Mechanic†Course from I.T.I. Pusa , Pusa, New Delhi, year 2002-2003,
Marks Obtained 79.85%
EDUCATIONAL QUALIFICATION:
S.No. EXAM BOARD YEAR OF PASSING SCHOOL/ University
1 D.S.S.E C.B.S.E 2000 Khalsa Boys Sr Sec School, Dev Nagar
2 D.S.S.C.E C.B.S.E
2002 Govt Boys Sr Sec School
Tank Road, Karol Bagh
3 BA(Hons)
Pol Sci Delhi University 2005 Delhi University.
ORGANISATIONAL EXPERIENCE:
1. Currently Working as Service Advisor in Carnation- A multi brand car solution (Jagdish Khattar Group.) since last two year 01.09.09
2. Worked as Service Advisor in Galaxy Toyota at okhla ph-1 from May’07 to Aug’09.
3. Worked with Sri Durga Automobile Pvt. Ltd, Moti Nagar as Service advisor from May’06 to Apr’07
4. Worked with Universal Auto Pvt. Ltd. (dealing with repair & troubleshooting of MICO Products) from March 2004 to April 2006 as System Technician:
- Undergone Training for Basics Knowledge, Repair & Troubleshooting of Inline (1 to 8 Cyl) & Rotary Pumps at Banglore Unit of MICO
- Undergone Training for Repair & Troubleshooting of Starting Motor (SELF) & Alternator at Regional Training Centre ,Delhi Pachkuian Road
– Undergone Training for ABS (Anti Braking System) at MICO, Banglore
5. Worked with “Gautam Auto Pvt. Ltd.â€, Faridabad for the Period August 2003 to February 2004 as Junior Technician.
Gautam Auto Pvt. Ltd is one of the big Dealers in Haryana Region for Sales, Servicing & Spares of “Ashok Leyland Productsâ€. As Junior Technician:
- Undergone through the vast knowledge, working, Training & repair of Aggregates†of Automobiles
- Troubleshooting & Overhauling of Major Aggregates of the Automobiles
– Carrying out the PDI & rectification of General Defects of Automobile Chassis
TRAINING:
NAME OFORGANISATION PERIOD OF TRINING NATURE OF WORK
Pearey Lal & Sons (EP) Ltd. ( Ashok Leyland’s main dealer for Delhi)
One Year Part time Training for Troubleshooting ,Repair & Rectifications of Problems of Automobile for the period 02-03 ( During the I.T.I. Course)
REFRENCES:
1. Mr. P.K.Kashyap, Area Manager-AMW (Mobile No-9811874618)
2. Mr. Naveen Kumar Garg- Lecturer , I.T.I. PUSA
(Phone No-011 55755359)
PERSONAL PROFILE:
FATHER’S NAME : Mr.Vidya Prakash Sharma
DATE OF BIRTH : 24.03.1983
SEX : Male
MARITAL STATUS : Unmarried
CATEGORY : General
INTEREST AND ACTIVITIES:
Cricket, Listening Music, Singing & Sketching
• HFP member of Delhi Civil Defence
• Attended Rescue Operation Training of Civil Defence
I wish to offer my candidature for any assignment suiting to my qualification. If given an opportunity, I assure you that I will carry out the task with responsibility and true to my Work potential by using my capabilities and skills.
HARISH PRAKASH SHARMA
PLACE : NEW DELHI
DATE : 15.11.09
Dear sir,
I apply my CV in the main gate so please check it out and p/z help me.
My E-mail id is riaz_magdum@yahoo.com
SIR My self MACHINIST WITH CNC PROGRAMINING looking for job in your organisation. My contact no 09788684598
It is said that ‘BEING THE BEST IS NOT GOOD ENOUGH, so i will try to give more than my best.
I have experiance of
JOHN DEERE EQUIPMENT PVT. LTD. PUNE. (MNC)
Tractor OEM, from 10th September 2008 as a diploma trainee Engineer.
contact no. 09762503721 or 09998670337
e-mail add. melorg_no_limit@yahoo.co.in
RAMESH.V
#17, 3rd Main Road, Kalyannagar, Nagarbhavi Road Bangalore-560072
Email: ramesh.ade@gmail.com Contact: +91-9035221962 D.O.B: 8th May’79
________________________________________
AUTOMOBILE SERVICE PROFESSIONAL
Seeking challenging assignments in the field of automobile servicing with renowned Brands
________________________________________
PROFILE
 Diligent, focused & technically sophisticated professional, serving the Automobile sector at Sapthagiri Auto Private Limited as a Service Supervisor
 Equipped with the expertise in Automotive Dealer Customer Service Functions, Fuel Injection Pump Service, Dealership Management, Customer Care & Complaint management, ISO Procedures, Data management & Analysis. Possess knowledge of automotive repair procedures for technical support
 Understand different aspects of engineering, including mechanical engineering, combustion, aerodynamics, electrical and electronic systems & fuel technology.
 Ability to think in an orderly and logical way, with imaginative & curious mind. Skilled in drawing well-balanced conclusions when dealing with complex issues and in interpreting procedures and guidelines in order to adapt them to cover complex situations.
 Excellent communicator with exceptional talent for problem solving and ability to handle multiple functions and activities in high pressure environments with tight deadlines.
 Demonstrated ability to manage human, financial and material resources towards the achievement of stated targets/ objectives, to plan and manage work programmes and to lead, motivate and provide effective guidance to a team of professional and support staff.
________________________________________
PROFESSIONAL EXPERIENCE
SAPTHAGIRI AUTO PRIVATE LIMITED Since 2006
Service Supervisor
 Spearheading efforts across handling and managing the servicing section
 Drive business growth through identification & penetration of new market segments for attainment of periodical targets with a view to optimize revenue.
 Establish & implement quality standards for setting up & meeting the targets of the company within time & cost parameters; skillfully performing all functional tasks like planning & controlling mold & machine trails according to the dispatch commitments & trouble shooting.
 Attend all kind of breakdown calls received from the customers & Ensuring timely servicing at the customer’s place, leading efforts across establishing healthy business relations with clients & external associates for securing long term customer loyalty; also managing shop floor & classroom training to the customers
 Efficiently coordinate with the design departments regarding design modifications and guidance in order to solve complex problems where analysis of situations or data requires an in-depth evaluation of multiple factors and tradeoffs.
 Accountable for handling branch service operations while generating revenue & service marketing.
PLANET HONDA 2001-2006
Technician & Service Advisor
DIRECTORATE OF TECHNICAL EDUCATION Bangalore 2000-2001
Apprenticeship Training
________________________________________
EDUCATIONAL CREDENTIALS
Diploma in Automobile Engineering
Government polytechnic Channapatna
SSLC from M.E.S Convent Bangalore
MechanicalDesignSotf ware course: PRO-E Design Engg________________________________________
Languages Known: English, Hindi, Kannada, Telugu and Tamil
References: Available on Request
Respected Sir/Madam,
This is Omkar V More from pune, India. I have completed my diploma in tool and die making and pursuing my B.tech in mechanical in correspondence. I have 1 year of work experience in Design and development field.
I can efficiently work in Pro-e, UG,CATIA and Auto cad. And this month i’m going to complete PLM training from siemens. I’m able to design 3D as well 2D designs in presstools, moulds, jigs and fixtures and also forging components and dies.
So, please inform me related jobs in your esteem organization.I have attached my resume please find it.
thanking you,
Your obedient
Omkar V More
+919762218801
VENKATA RAMA BHADRA RAJU DATLA
S/O D.CHANDRASEKHAR RAJU
1-63-12, M.A.N RAJU NAGAR,
NEAR PRABHA JUNIOR COLLEGE,
POTHINAMALLAYA PALEM,
VISAKHAPATNAM (ANDHRA PRADESH)
INDIA 530041.
Email: rajeshvarma28@gmail.com
PHONE: +918912790459, +919949837434, +919959382318.
OBJECTIVE:
To obtain a challenging position as a mechanical sector with in large exciting company.
EXPERIENCE:
Hindustan Shipyard Ltd, Visakhapatnam,
1995-1996
Un-paid apprentice in maintenance department.
Did maintenance and small or major repairs for heavy vehicles like diesel engine.
M /s Coromandel Fertilisers Ltd.
1997-1998
Paid Apprentice in maintenance department
Repairing heavy vehicles like payloader, lorries and trucks.
Assembling the engine, gear box and over hauling brake system.
Bothra Shipping (P) Ltd
1999-2000
Worked as a tally clerk.
Rama Krishna Constructions
2000-2004
Worked as a supervisor for the purchase of the steel and cement.
Responsible for the maintenance of bank duties.
Hero Honda motors LTD
Took training for one month.
Bhanu automobile Ltd
2004-2005
Worked as a supervisor, prepared job card, identifying the repairs of light vehicles and issue of spare parts.
Automotive Manufactures Ltd
2005-today
Vehicle maintenance and repairing minor and major repairs of Leyland engines.
Issue of tools and oil for mechanics and registration and billing of the same.
Issue of spare parts and billing them.
Distributing the spare parts of Leyland to their locations.
EDUCATIONAL QUALIFICATION:
Passed S.S.C (1990-1991)
Passed I.T.I (1992-1994)
TECHNICAL QUALIFICATION:
MS office.
PERSONAL PROFILE:
Name : VENKATA RAMA BHADRA RAJU DATLA
Father’s Name : D.Chandrasekar Raju
Date of Birth : 05-06-1974
Religion : Hindu
Passport No : H5518354
Languages Known : English, Hindi and Telugu
Marital Status : Single
Address for Communication : 1-63-12, M.A.N RAJU NAGAR,
NEAR PRABHA JUNIOR COLLEGE,
POTHINAMALLAYA PALEM,
VISAKHAPATNAM-530041.
Given a chance to serve your reputed organization, I assure you sir, that I will discharge my duties to the entire satisfaction of my superiors and management.
Place:
Yours faithfully
Date: D.V.R.B.Raju.
your are open company opportunities to people to do job
Dear sir,
I have completed diploma in mechanical engg. With 1.6 years exp. in piaggio vehical pvt ltd baramati,(up to till) Please give me apportunity your company .My exp. in production &quality .
Thanks And Regards
Rahul Lokhande
Dear Sir/madam,
I have completed my diploma in automobile engineering in 2006(regular) & pursuing mechanical engineering(correspondence) simultaneously as well as working in ICICI LOMBARD General Insurance Company Ltd. in new delhi as a surveyor or loss analyst of motor claim 4 wheelers with 3.5 years experience.I want to be join your organization to work hard & smart to give the best result of high growth to organization
Warm Regards
Yatin Sharma
M-9953604979
9212334420
Sir,
I have completed my diploma in manufacturing technology in 2009 & presently associated with OCL India ltd as junior engineer in mechanical maintenance department. Please give me a opportunity to work with your company.i will utilise the best of my knowledge & skill.
Respected sir,
I have completed diploma in mechanical engg. in 2009 with first class & i have completed design software Pro-E wild-fire 4.0. Sir I have give me one chance to work with you. I have plesure to work with you.
Thank you.
HI myself harsh babar i am a mechanical engg . at presently working in steel plant ( essar steel) as a quality engg . i want to work in your organization as a traniee . if any vacancy in your organization so pl call me . my phone no is 9096564920
Curriculum Vitae
# Flat No.12 Amit apartment,
Krishna Colony Paud
Road, Pune -28,
Mobile No. 9373011517
Pramod.Y.Masali E-mail:pramodmasali@rediffmail.com
Professional Experience
Around 1 year of experience in CAD modeling and Tool design using CAD software (Pro/E Wildfire2.0) in casting domain.
Key Skills
CAD Software Expertise : Pro-E Wildfire2.0 (Solid Modeling, Surfacing, Assembly & Detailing)
: AUTOCAD 2000
Language : C,C++
Academic Profile
B.E. (Mechanical)
Shri. Basaveshwara Engineering College Bagalkot . VTU Belgaum
July 2008.
Current Work Status
Organization:
BLUE BIRD ENGINEERING SERVICES, Pune
Designation: CAD Engineer
Software using: PRO/E 2002
Since November 2008 to till date
Blue Bird Engineering Services is pioneer in CAD-CAM solutions. Providing customized solution in the areas of Engineering (CAD/CAM) for a variety of applications in the industry.
Job Responsibilities:
• Conversion of 2D drawings to 3D model
• Co-ordination with Clients
• Documentation
• Training the candidates on PRO/E 2002
Modeling & Drafting
1. Werk Hannover
Role: Surface Modeling & detailing 3D Model was completed with 2D Drawing
Company: – Metal Craft Ltd.
2. Clutch Housing.
Role : Surface Modeling & detailing
3D Model was completed & fully parametric from 2D Drawing. .
Company:-Mahindra & Mahindra Ltd.
3. Cylinder Head
Role : Drafting & detailing of 2D Drawing
Company: – Kirloskar oil engine Ltd.
4. Axle Beam Housing
Role : Surface Modeling & detailing
3D Model was completed using relation & fully parametric from 2D Drawing. And completed with pattern like split pattern & core box Prepared check sheets.
Company:-Tata Motors Ltd.
5. CAC Turbo pipes
Role : Surface Modeling & detailing
3D Model was completed using relation & fully parametric from 2D Drawing. And completed with pattern like split pattern & core box Prepared check sheets.
Company:- Kirloskar oil engine, Ltd.
6. Manifold exhaust
Role : Drafting & detailing.
2D Drawing is completed with parametric drawing.
Company:-Cummins Indian, Ltd.
Key Subject:
1 Machine drawing
2 Strength of material
Job Profile : 3D Modeling, Assembly, Surfacing, Converting IGES into Solid, and splitting the jobs
And making 2 D drafting as per drawing with machining billing the material.
Personal Profile
Name : Pramod.Y.Masali
Languages Known : English, Hindi, Kannada
Date of birth : 26/06/1982
Sex : Male
Marital Status : UnMarried
Permanent Address : S/O Y.M.Masali
Police Station Navanagar
Near State Bank of India.
Bagalkot-587102
Dear sir,
I am Btech.(ME) 3rd yr student want to take summer training for 6 weeks in mercedes-benz in pune .
Please take an appropriate action as soon as possible.
Thanking You
Ramabhadra Raju Datla (Rajesh)
* : 1-63-12 w M.A.N Raju Nagar w P.M Palem w Visakhapatnam AP 53041
8 : rajeshvarma28@gmail.com
( : +91-891-2790459
) : +91-9949837434
Objective
To obtain a challenging position as Sr. Technician in a Multi national Automotive Corporation. I am a well qualified technician who has experience on all domestic and foreign cars and trucks. I am a hard working, dependable, and loyal employee looking to further my knowledge and experience. I am currently seeking a job with a company in which I can become a valued employee and help better the company as a team player.
Profile
Over 12 yrs of Industry Experience in Heavy Equipment, truck, Car Segments.
Experience with Several Major Multi National automotive Brands & Models.
Worked with Latest Industry standard Diesel & Petrol Combustion Engines.
Experience in Engine Assembling, Tuning & rebuilding, Exposure to all kinds of Different break Systems, steering & Suspension
Fixing the Electronics Starting & Charging Systems
Demonstrated experience and thorough knowledge of automotive equipment mechanics including electrical systems, brake and Engine Overhaul procedures on vehicles such as Heavy Vehicles, buses, Motorcycles and trucks.
Deep experience inspecting and diagnosing mechanical and electrical malfunctions.
Excellent ability to perform a variety of skilled repairs on automotive equipment, components and systems.
Proven knowledge of preventive maintenance, breakdown, repair and trouble shooting of automotive vehicles.
Uncommon ability to effectively identify required parts for vehicle repair, prepare estimates of costs, time and materials.
Strong ability to effectively reference, interpret and apply information disseminated from mechanical, electrical and other relevant automotive schematics.
Profound knowledge of basic computer skills to add information to computerized vehicle maintenance programs.
Remarkable ability to operate and maintain hand and power tools typically used in the trade and standard automotive diagnostic equipment such as but not limited to, engine and emission analyzers, tire changing and balancing equipment, tachometers/dwell meters, volt/amp meters and air conditioning recharging units.
Brands: Tata, Layland, Mahindra, Honda, Caterpillar, Hindustan Motors, Komatsu, ISUZU, BEML.
Engine Models: 1515, 1612, 2214, 2516, 2214 super, 2214hino, 3516tusker, 4018 hino, 3121, 3116,
Experience
Automotive Manufactures Ltd, Dept., Works & Maintenance, Sr. Service Technician. 2005 – Present
Vehicle maintenance and repairing of Leyland & Mahindra Automobiles.
Maintaining the workshop Tools and Lubricant Inventory and Billing.
Spare parts Section in-charge for managing all the spare parts inventory and Catelogs.
Responsible for Spare parts Sales & Distribution to the Layland Customer Locations
Bhanu automobile Ltd, Maintainence Workshop, Automobile Technician Supervisor, 2004-2005
Inspect and diagnose diesel, gas, electric automotive equipment, components and systems to determine necessary repairs.
Make minor-to-major repairs to any automotive equipment.
Fabricate, construct and/or modify new or special equipment, mechanical, engine parts as needed.
Install and repair special equipment.
Operate and maintain tools, machinery and computerized systems used in the maintenance and repair of equipment.
Troubleshoot and repair systems and components.
Estimate the cost of materials and labor for work orders; and keep simple records and prepare reports as necessary.
Train and provide work instruction to Assistant Automotive Technicians or Attendants.
Rama Krishna Constructions, Purchase Dept, Site Manager
2000-2004
Worked as a supervisor for the Mega construction Project
Responsible for Procuring & purchase of all the Construction materials
Negotiating and Identifying the Necessary Materials for the Construction project
Responsible for all the Financial Transactions like Depositing, Withdrawing, Check & Project accounting.
Monitoring and Executing the Daily responsibilities of the Teams and Workers.
Providing all the necessary Client adjustments and Corrections.
Bothra Shipping (P) Ltd, Finance, Tally Clerk, 1999-2000
Managing the Cargo Handling Facility accounting and Goods
Responsible for the Cargo Inventory and Registry.
Monitoring day to day Account tally details and Reports
Coromandel Fertilizers Ltd. Works & Maintenance, Automobile Technician, Intern, 1997-1998
Internship as a Automobile Technician in maintenance department
Repairing heavy vehicle Pay Loaders & Off High way Heavy Duty Trucks.
Maintained and Assembled the Komatsu & Caterpiller Heavy machines
Assembling the engine, gear box and over hauling break system
Dispensed fuel checked and refilled fluid levels and changed oil and filters, as necessary.
Made minor adjustments and repairs on
Checked equipment for defects (such as cracked or broken hoses or belts, worn tires, and inoperative lights).
Removed and replaced batteries.
Oiled and greased equipment. Tested and drove vehicles to assure proper working order, and delivered vehicles.
Cleaned garage area and maintained shop equipment.
Disassembled and cleaned vehicle parts.
Assisted with mechanical and body repair work, as necessary.
Performed other related duties as assigned.
Hindustan Shipyard Ltd, Dept of Transportation, Maintenance, Automobile Maintenance assistant, Visakhapatnam, 1995-1996
Did maintenance for small & major repairs of heavy vehicles like diesel engine buses, trucks.
Distributed fuel, verified and refilled fluid level and altered oil and filters, as required.
Created small adjustments and fixes on tools (like replacing and/or repairing tires, heads and tail-lamps, windshield wipers, muffler clamps, brakes, balancing wheels).
Tested equipment for faults (like broken or cracked hoses/belts, inoperative lights and worn tires).
Replaced and removed batteries. Oiled and greased tools. Checked and run vehicles to guarantee correct working orders, and transported vehicles for refueling and servicing.
Educational Qualification
Industrial Technical Institute, Automobile Engg.. (1992-1994)
Diploma in Mechanical Engg, Govt,. Polytechnic (Present)
Technical Qualification:
Computer Skills, Ms-Word, MS-Excel, MS Windows, MS- PowerPoint
Certifications
dear sir i am applying techanician job in your organization iam realy feel good open the oppurtunities to people in this field
VINOD VIVEKANAND GORANALLI vinod_goranalli@yahoo.co.in 300, East Mangalwar peth, solapur
Solapur-413002 Mo. +91-966522306
Summary :
ï± B.E.(Mechanical), DME
Objective :
ï± To join an organization that shall lead to my professional and social growth and inturn be a contributing factor in the growth of the organization.
Work Experience:
ï± Presently working in HOERBIGER INDIA PVT. LTD., PUNE from 4 months.
ï± Functional Area: Production (Classical valve Assembly Section,& QUALITY)
ï± Post Held: Production Supervisor
Academics :
Exam Institute University/Board Year of Passing %
B.E.2nd MSBEC,LATUR SRTMU,NANDED August2009 73.87%
B.E.1st MSBEC,LATUR SRTMU,NANDED Feb2009 67.12%
T.E1st MSBEC,LATUR SRTMU,NANDED Feb2008 63.50%
T.E.2nd MSBEC,LATUR SRTMU,NANDED July2008 68%
S.E.1st MSBEC,LATUR SRTMU,NANDED Feb2007 61.86v
S.E.2nd MSBEC,LATUR SRTMU,NANDED July2007 65.86%
D.M.E. SESP SOLAPUR MSBTE, Mumbai May 2006 68.46 %
S.S.C. Adarsh high school,solapur Pune Board March 2002 70.53%
Aggregate Percentage of Marks for Degree : – 66.70%
Skills Proficiency :
Design Software PRO-E,AUTOCAD-2000
Strengths :
ï± Hardwork and ready to accept the challenges.
ï± Positive attitude.
ï± Believe on discipline work.
ï± Friendly co-operation with colleagues.
Curriculum Project:
Title: Mini tractor at only 27000/- Rs
Description: In this project we by using the kirloseker diesel engine of 3 H.P.we made the tractor which gives avg.20km.For this tractor we can attach our big tractor tools easily.This tractor can run on kerosin also.
Co-curricular activities:
ï± Parcipated in NATIONAL LEVEL PAPER PRESETION AT VPCOE, Baramati.
ï± Worked as Event co_ordinator in National Level Event our college
ï± Parcipated in NATIONAL LEVEL CRICKET,KHO-KHO at COEP,PUNE IN 2009
ï± Got Best Student Award in SSC
Personal Details :
ï± Name : Mr.Vinod Vivekanand Goranalli
ï± Address : 300,East Mangalwar Peth,solapur
Dist: Solapur – 413 002
ï± Date of Birth : 03/12/1986
ï± Nationality : Indian
ï± Marital Status : Single
ï± Languages Known : English, Hindi, Marathi ,kannada
Declaration: I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentione
DATE:- VINOD V. GORANALLI
hi sir i m 3rd year mech student & want to do training in your plant pune can u help me
my mob no 9464787360 ,
9915133360
hello sir,
I am a B.Tech 2nd year Mechanical Engineering student at NIT Allahabad.
Sir i would like to know if there is any possibility of getting a summer training experience at your plant for the period may-july 2010.
My CGPI till the current semester is 8.29.
Hoping for a reply very soon,
Devanshu Awasthi
Hello sir,
I am pursuing my B.tech from TULA’S INSTITUTE DEHRADUN(UTTRAKHAND).
sir i heared about your company more and I am interested in that so i want a summer training and some knowledge at your plant for the perod june-july2010.
Hoping i will get response soon.
thanking you
madhur sharma
HII AM 1ST YEAR MBA STUDENT I AM LOOKING FOR INDUSTRIAL MARKETING SO IF U HAVE ANY SUMMER PROJECT IN PUNE PLZ REPLY ON MY MAIL THANK YOU
hi,
I am a student of b.tech.(3rd year) with industrial engg.& management from National institute of technology kurukshetra. i want to take summer traning from mercedes-benz plant in Chakan, Pune.
Hoping i will get response soon.
thanking you
neeraj kumar
b.tech.(3rd year)
national institute of technology kurukshetra
haryana
Am Mr Henry Smith,The chief executive officer of Atlantic Loan Firm.I have been certified and approved to give financial loans as low as 2% to individuals and companies seeking finance or funds help. Note: all appllicant must apply with the minimum loan of 5,000 Euro. For more details you can contact us via mail:atlanticloan.firm174@googlemail.com
HI myself Rajeev Misal i am a Automobile engg . at presently working in mercedes-benz, Auto hanger (I)pvt ltd.,Andheri as a Technician . i want to work in your plant as a traniee . if any vacancy in plant so pl call me . my phone no is 9226239101
Iam Kthandaraman chennai completed diploma in mechanical engg and i am looking for the job in your firm if you have the any post for the diploma candidate please send a mail
P. KOTHANDARAMAN +91-9789987763 (mobile)
#66/71, Kuttiappan street, +91-9790979198 (mobile)
Medavaakam, Chennai-600010,India.
pkraman2001@yahoo.co.in
CAREER OBJECTIVE
To contribute product design, development and management skills in a highly challenging and exciting environment
EXPERIENCE
Caterpillar EDC-India Ltd., Chennai(US MNC) Sep2005 to Dec2009
Assistant Engineer- Engineering & Design Center
•Worked for the team called “Diversified power products†which deals with products like various Types of Engines & Gensets and Supports the product engineering team located at USA
•Nature of job involves working on parts & assemblies of Diesel and Gas Engines and also respective plastic accessories such as electric junction box, generator junction box and some mounting covers etc. using pro/Engineer (wildfire 2.0) as per the requirement of Process partners.
•Study inputs from the Client and solving issues in Models, Drawings by teleconference and sametime by IBM Lotus notes.
•Using the product data management (PDM) software called Team center and Citrix for maintaining the pro/e drawings and models throughout the product life cycle.
•Responsible for achieving zero error/drawing by applying corporate engineering standards and procedures of Caterpillar.
•Worked in projects involving sheet metal, casting and Structural Design Procedures-fluids and electrical lines Performed management activities such as Project and shift co-ordination.
•Preparation Process checklist and its ownership shared with customer
•Repetitive components used various groups were identified for duplication of drawing
and reduce the time for detailing work and Backgrounds Geometry
•Scheduling a Work Process to meet the customer requirements.
•Maintaining the drawing database for each drawing in Engineering Data System.
•Responsible for defining and delivery a projects through Team center Enterprise
Sri Vinayaka Engineering Works Jun2003 to Feb-2005
Cad Designer
•Worked in Pro/engineer (wildfire 2.0) and Autocad2000 for designing die products for plastic materials for different types of jewel box, medical instruments and some automobile plastic accessories
•Implementing the design changes in the pro/e models and file export to studio work model to create NC codes for CNC operation and based on the concept drawings issued by the product customer
•Checking the drawing errors by using QC checklist.
CADD- CENTER Aug2002 to Jun2003
Trainer-Cadd
•Worked as a Cad Trainer cum project co-ordinater, given training for the students and did machine tool design as per the customer needs.
Tool used : Pro/engineer (wildfire 2.0) and Autocad2000
ENGINE FACTORY, ministry of defence July2001 to July2002
Technician
•Technical document preparation for customer approval –General arrangement drawing, cross sectional drawing, technical data sheet, performance curves and CNC Programs
•Responsible for preparing programs and settings in CNC
•Involved in information technology system for loading software such as operating system and technical software
Tool used: Autocad2000 and CNC Machines
Sri selvarani Engineering works June1999 to July2000
Machine shop supervisor cum machinist
•Involved in reverse-engineering activities such as preparing part drawing from benchmark samples using equipments like profile projector and co-ordinates measuring machine
•Designed Jigs and fixture for various processes of the new products. Worked closely with production engineers in arriving at the final design of jigs & fixtures.
PROFESSIONAL SKILLS AND KNOWLEDGE:
1.3D modeling, Assembling & detailing using Pro/Engineer Wildfire 2.0. and Ideas ver.8
2.Experience in working with PLM/PDM software like Team center, Citrix and Wind-Chill
3.Modeling and Drafting of General arrangement drawings and Cross sectional drawings using Auto CAD
4.Operating System – Windows 98,2000,XP,NT and Basic Application
5.GD&T – ASME Y14.5 specification.
6.Worked for products such as Diesel and Gas engines, Gensets, Rocker levers, bearing housing-Turbochargers, Centrifugal pumps, Mechanical seals, plastic junction box and Simple purpose Machines
EDUCATIONAL QUALIFICATION:
Diploma Diploma in Mechanical Engineering Mechanical DOT April1999
Application Software Institute Year of completion
Designing Tool
AutoCAD (Re.2000) SISI 1999
Designing Tool PRO/Engineer (Wildfire 2.0) and IDEAS ver.8 Pentasoft Technology 2002
MS Office tools Word, Excel &
PowerPoint Working Experience ——
COMPUTER QUALIFICATIONS:
TRAINING PROGRAMS ATTENDED:
Proe models and drawing’s data-cleanup work and submission process using PDM/PLM software (Teamcenter) in caterpillar Inc., Peoria, USA for 3months
SDP Hose & Fluid line routing training by caterpillar Inc., Peoria, USA
Geometric Dimensioning &Tolerance (ASME Y14.5 ) training by Applied Geometrics Inc, USA
Voice Quality, Call handling & Business writing workshop Conducted by Holistic training solutions, New Delhi.
Advance Training in Pro/Engineer (Wild Fire version.2.0) Conducted by PTC Engineering Solutions, Chennai..
Engine Management Training by Education center. CIPL, Tiruvellore and GMMCO Chennai
PERSONAL DETAILS
Name : P.Kothandaraman
Father Name : C.Ponnurangam
Date of Birth : June 28 1976
Nationality : Indian
Marital Status : Single
Passport No. : E9163258
Passport Validity : Till May 24th 2014
Address for communication: #5/4 Anbazhalagan street, Vijayalakshmi-
-puram, Ambatur, Chennai-600053
Dear sir/madam
i am diploma in mechanical enginear .i have 2 years exp in mahindra&mahindra in kandiwali FES plant SCPC department if any vacancy in your organization so pl call me . my phone no iS 09702814304
THANKS
SIR I AM CURRENTLY DOING MY DIPLOMA IN MECHANICAL ENGG IN MURUGAPPA POLYTECHNIC IN 7TH SEMESTER. MY PERCENTAGE OF MARK IS 95%(TILL 6TH SEM).SIR I HAVE MORE KNOWLEDGE’S IN AUTOMOBILE TECHNOLOGY,CAD/CAM,GENERATING CNC PROGRAM FOR ANY COMPLICATED PROFILE,PRESS TOOLS DESIGN,MACHINE DESIGN AND KNOWLEDGE’S IN AUTO CAD DRAFTING,PRO-E.I WANT TO DO JOB IN YOUR COMPANY SIR,IF I AM SELECTED IN YOUR COMPANY I HOPE I WILL COME UP FOR YOUR EXPECTATION. MY CONTACT NO 9677251534,9094512396
hi , i have passed my automobile diploma in 2008. and i have worked as a service advisor with ford & honda 2yr experience. and now i’m looking forward to work with final testing of newly manufactured cars.
M: +91-9379059997 , +91-9902662887
hai
i am a btech graduate in mechanical currently persuing mba.
I am a first year student and as a part of my cariculam i have to do a project on second year and would like to do this on your organisation. so i kindely request u to tell me the procedures to do the project in your organisation….
good morning sir ,
I am ajinkya pujari currently doing a summer project from atlas copco .I just wanted a help as i want to meet the purchase head of merc pune plant regarding the atlas copco compressors .
thanking you Ajinkya pujari
hi
i have pass diploma in automobile in 2010 i want a make experiance in automobile and i have worked in huandai service center in pune i want a apprentiship in company …. i have most interest in sutomobile…
place- pune
mobile no -9763782822